How is the automatic fabric spreading and cutting machine maintained?

We know that the automatic fabric spreading and cutting machine has a great influence on cutting, so how is the automatic fabric spreading and cutting machine maintained? Let's go take a look next.

This is the content list:

l Daily maintenance

l Maintenance of beam frame

l Maintenance of the control cabinet

Daily maintenance

The automatic fabric spreading and cutting machine uses compressed air to blow the dust on the pressure plate of the cutting knife and uses a soft cloth to clean the oil stains. If necessary, replace the automatic fabric spreading and cutting machine pressure plate edge and spiral cable, because the automatic fabric spreading and cutting machine pressure Excessive wear of the disc edge may cause the presser foot to loosen, which will cause damage to the cylinder of the automatic fabric spreading and cutting machine. When replacing the pressure plate edge of the automatic fabric spreading and cutting machine, pay attention to the pressure plate along the spiral guide rail when it is loosened from the rotating bracket. to. Check the wear of the cutting knife of the automatic fabric spreading and cutting machine. When the effective width of the cutting knife of the automatic fabric spreading and cutting machine is smaller than the set width, it must be replaced, otherwise, it will cause the fabric to deform. Pay attention to the penetration of the cutting knife when replacing the automatic fabric spreading and cutting machine. If the cutting knife of the automatic fabric spreading and cutting machine penetrates the bristle brick too deeply, it will cause premature damage to the bristle brick and cut in the last layer. Quality issues. Clean and lubricate the cutter guide of the automatic fabric spreading and cutting machine. Check the position of the cutting knife lifting shock absorber of the automatic fabric spreading and cutting machine to prevent the phenomenon of excessively long up and down the vibration of the cutting knife of the automatic fabric spreading and cutting machine, and the phenomenon that the position is lower and the knife is broken. Check the wear of the sharpening belt and the sharpening cable of the automatic fabric spreading and cutting machine, clean the dust on the sharpener arm of the automatic fabric spreading and cutting machine and the pivot of the sharpener, and check the condition and work of the central sharpening guide rail of the automatic fabric spreading and cutting machine gap.

Maintenance of beam frame

The beam frame is the carrier for the movement of the cutting head of the automatic fabric spreading and cutting machine. The contents to be maintained every day include: check whether the sealing and pressing plates on both sides of the automatic fabric spreading and cutting machine are in good condition, and there is no air leakage, and the cloth is spread automatically. The comb plate before and after the cutting machine is not broken or twisted. Automatic fabric spreading and cutting machine uses compressed air to blow the beam frame, take a soft cloth to clean the cutting head guide of the automatic cloth cutting machine, check the condition of the automatic cloth cutting machine X-axis and Y-axis transmission cable belt, automatic cloth cutting machine Lubricate the X- and Y-direction cutting head moving guides. Check the damage of the bristle bricks of the automatic fabric spreading and cutting machine to ensure that there are no pits that cause the knife to break; check the condition of the pinion gear of the beam frame of the automatic fabric spreading and cutting machine to ensure that the comb teeth are not bent or deformed. Check the belt wear of the automatic fabric spreading and cutting machine to ensure that there are no cracks, deformations, or distortions.

Maintenance of the control cabinet

The control cabinet is the central control center of the automatic fabric spreading and cutting machine. The daily maintenance content includes.

Vacuum inlet and outlet grille. The cutting system of the automatic fabric spreading and cutting machine has a total of 6 filter grids. The automatic fabric spreading and cutting machine has two grids on each side cover. Loosen the grid from the grid seat of the automatic fabric spreading and cutting machine to remove dust. Two of the automatic fabric spreading and cutting machines are equipped with filters, and the filters must also remove dust. Use a blower to remove the dust on the bracket of the automatic fabric spreading and cutting machine, and clean or replace the system box filter.

Wuhan TIMING Weiye Technology Co., Ltd. is the newest industrial company. To produce a better automatic fabric spreading and cutting machine, the production and maintenance of the automatic fabric spreading and cutting machine are to the extreme. If you are interested in the automatic fabric spreading and cutting machine, please contact us. Our website is https ://www.timingcutter.com/.