What about the air-floating cutting table and its application?

To complete a major task in work, we must first understand the machine to carry out various tasks smoothly. To avoid many failures, it is very important to understand and master the air-floating cutting table. If needed, the following article will explain the air-floating cutting table in detail.

This is the content list:

●About the working principle of the air-floating cutting table.

●Industry application of air-floating cutting table.

About the working principle of the air-floating cutting table.

To master the working principle of the air-floating cutting table is to have a detailed understanding of the equipment from all aspects so that the operator can quickly determine where the fault has occurred during the use of the air-floating cutting table equipment. Today I will give you a detailed introduction to its working principle. The work of the air-floating cutting table mainly depends on the hydrophilicity and hydrophobicity of the surface of the suspended solids. Air bubbles are easy to adhere to the surface of hydrophobic particles, and air floatation can be used. The hydrophilic particles of the air-floating cutting table can be transformed into hydrophobic particles after proper chemical treatment. In the air flotation method in wastewater treatment, the air flotation cutting table often uses a coagulant to agglomerate colloidal particles into flocs. The floc has a net-like structure, which easily traps air bubbles, thereby improving the efficiency of the air-floating cutting table. The air flotation cutting table used in the air flotation cutting table includes an air flotation tank to complete the separation process and auxiliary equipment to generate air bubbles. The bubbles will quickly adhere to the particles, emulsified oil, fibers, and other impurities in the water and the surface of the floc formed by the coagulation reaction, making the specific gravity of the floc less than water, and being forced to float on the water surface to achieve solid-liquid separation. It is very important to understand and master the influence of the air-floating cutting table. The slag floats on the water surface and is scraped off. The separated water enters the clean water tank smoothly through the bottom perforated pipe, part of the water returns as dissolved gas water, and the clean water is discharged through the valve.

About the industry application of air-floating cutting table.

The air-floating cutting table is mainly used for the purification treatment of industrial wastewater in papermaking wastewater, chemical industry, printing and dyeing, food, and other industries. The air-floating cutting table can effectively separate algae, fine suspended matter, and micro-aggregates from the ground and water. Recover useful substances from industrial wastewater, such as pulp and fillers in papermaking wastewater, instead of separating and concentrating the remaining sludge from the secondary settling tank. The air flotation cutting table first adopts a filter tank with a deflector for pretreatment to remove coarse SS impurities in the sewage, reduce the operating load of the air flotation cutting table, and reduce the amount of flocculant added in the subsequent treatment process. Changes in water volume and water quality are highly adaptable. The air-floating cutting table is particularly suitable for biochemical treatment processes that are prone to sludge expansion. The air-flotation cutting table separates and recovers suspended oil and emulsified oil in oily wastewater, and separates and recovers surfactants, metal ion plasma substances. If you are interested in an air flotation cutting table, you can contact us, our website is https://www.timingcutter.com/.