Publish Time: 2021-12-22 Origin: Site
We know that the automatic fabric spreader is composed of various systems that cooperate to complete the work of the automatic fabric spreader, which mainly includes the walking system, the hydraulic system, the feeding and distributing system, and so on. But, under certain circumstances, the automatic cloth paving machine has a technical failure, so what is the reason for the technical failure of the automatic fabric spreader? Let's take a look together next.
This is the content list:
l The hydraulic oil of the automatic fabric spreader is overheated
l The spiral distributor of the automatic cloth spreader does not work
l Precautions for automatic fabric spreader
The excessively high oil temperature of the hydraulic system of the automatic fabric spreader will reduce the viscosity of the oil, increase the leakage, and destroy the oil film of the lubricated part, which will increase the wear of the parts of the automatic fabric spreader. At the same time, high temperatures will cause premature aging and damage to the gasket made of rubber and other materials of the automatic fabric spreader. Therefore, it is very important to control the suitable oil temperature of the automatic fabric spreader. When the oil temperature of the automatic fabric spreader is too high, it must be shut down for inspection.
Check whether the liquid level of the fuel tank of the automatic fabric spreader is too low. Experience has shown that the high oil temperature of the automatic fabric spreader is often caused by the lack of oil in the oil tank of the automatic fabric spreader, so it should be replenished in time when the automatic fabric spreader is short of oil. Whether the hydraulic oil filter element and circuit of the automatic fabric spreader are blocked. Whether the radiator of the automatic fabric spreader is normal. If a large amount of dust adheres to the radiator of the automatic fabric spreader, it can cause poor heat dissipation and increase the oil temperature. the radiator should be cleaned up in time. Whether the hydraulic oil quality of the automatic fabric spreader is qualified. If the quality of the added oil is not up to standard, the oil temperature of the automatic fabric spreader system will also be too high.
In addition, the hydraulic system of the automatic fabric spreader works when it is short of oil, which is likely to cause damage to the pump and motor. Therefore, after the automatic fabric spreader is out of oil troubleshooting.
The spiral distributor of the automatic cloth spreader does not work
The left and right spreaders sometimes do not work in automatic fabric spreaders. The reason is generally that the oil replenishment system of the automatic fabric spreader is faulty. The reasons for the low pressure of the oil replenishment system of the automatic fabric spreader are: the oil inlet of the oil replenishment pump of the automatic fabric spreader is not smooth. The pressure of the overflow valve of the charge pump of the automatic fabric spreader is low. The feed pump of the automatic fabric spreader is malfunctioning. The hydraulic motor of the automatic fabric spreader is seriously leaking. In general, check the filling pump and the overflow valve of the automatic material paver.
In the use of an automatic fabric spreader, the hydraulic oil replacement cycle depends on the quality of the oil used. The replacement of hydraulic oil should be carried out at working temperature. To ensure good heat dissipation of the hydraulic system of the automatic fabric spreader, the hydraulic oil radiator should also be cleaned regularly. Since the construction environment of automatic fabric spreaders is generally harsh, the replacement cycle of the hydraulic oil filter element of the automatic fabric spreader should also be shortened. Check when replacing the new filter element. It is strictly forbidden to use deformed, contaminated, or rusted filter elements. When starting the engine of the automatic fabric spreader every day, you should first for a while, and then manipulate the various executive elements of the automatic fabric spreader to work, which is conducive to the use of the hydraulic pump. Due to the long-term use of the automatic fabric spreader, the hydraulic system parameters of the automatic fabric spreader sometimes change. Therefore, the parameter settings of the hydraulic system of the automatic fabric spreader should be checked regularly and adjusted in time.
Wuhan TIMING Weiye Technology Co., Ltd. is the latest industrial company. To reduce the technical failure of the automatic fabric spreader, it has carried out a large number of automatic fabric spreader tests before leaving the factory and maintained the automatic fabric spreader. In the market, if you are interested in an automatic fabric spreader, you can contact us, our website is https://www.timingcutter.com/.